Terms & Conditions

Abby Lighting & Switchgear Limited


The details provided on this website were correct at the time of publication and are for information purposes only—they do not form any obligation on our part.

Abby Lighting & Switchgear Limited reserves the right to discontinue any products from its collection at any time whatsoever and without prior notice. Abby also reserves the right to make technical and photometric modifications as well as change any parts, details, or finishes deemed suitable for improvement purposes or due to commercial and construction requirements. Abby, in any case, will try to do everything in its power to ensure all data and information herein are correct and up-to-date, yet shall not be accountable if, regardless of proof reads, there should be inaccuracies and/or errors.

Abby will not be held liable for any discrepancies between the illustrations or descriptions given and the actual product. Output data figures stated are typical values.

The terms and conditions of sales are as follows:


The details provided on this website were correct at the time of publication and are for information purposes only—they do not form any obligation on our part.

1. Validity of Quotation/Acceptance of orders:

Quotation shared by the company is valid for 15 days from the date of issuance unless otherwise agreed to by the company in writing. The Company reserves the right to refuse the Purchaser's acceptance of a quotation. In the event that no quotation is given by the Company and it has received an order from the Purchaser, all deliveries are made subject to the terms & conditions of sale set out by the Company.

Any of Purchaser's terms and conditions which are different from or in addition to those contained in this agreement are objected to by the Company and shall be of no effect unless specifically agreed to in writing by the Company. Commencement of performance or shipment shall not be construed as acceptance of any of Purchaser's terms and conditions which are different from or in addition to those contained in the Agreement. If a contract is not earlier formed by mutual agreement in writing, acceptance by Purchaser of products or services furnished by the Company pursuant hereto shall be deemed Purchaser's assent to all of the terms and conditions of this Agreement.

2. Prices:

Price lists may be altered without notice and goods are invoiced at prices in force on the day of despatch. For goods, which are the subject of a written quotation, the validity of prices are as detailed in that quotation. The Company reserves the right to adjust the per unit rates should the Purchaser require smaller number of units to be delivered than those quoted for.

In the event of variations or suspensions of the work by the Purchaser's instructions or lack of instructions, the contract price shall be adjusted to reflect costs involved. Quoted prices do not include special packaging, such as, crates, case, pallets, stillage's or skids or other such packing. A charge for such packaging would be made to the Purchaser, should the goods require such packaging.

3. Samples:

Any samples submitted with the Company's quotation or at the Purchaser's request must be returned within seven (7) days of receipt and may be charged if not so returned. Deposits paid for samples will be forfeited, if samples are not returned within the stipulated time of seven (7) days unless prior agreements for the same have been accepted by the Company is writing.

4. Modification/Cancellation of Orders:

Orders may not be cancelled or modified, either in whole or part, without the company's express written consent. If the Company consents to any order modification or cancellation, it may impose an order modification fee upto fifty per cent (50%) of the order value.

In no circumstances may goods, supplied against a firm order, be returned without the purchaser having first applied for and obtained the written consent of the Company. A handling charge of upro fifty per cent (50%) may be deducted from any credit allowed.

5. Delivery:

When an order is accepted by the Company, the Company shall upon request share the tentative shipping date or expected lead time. The Company endeavours to observer to dispatch goods on or before this date. Acknowledged shipping dates and standard lead times are estimates and are not to be interpreted as any type of guarantee. Actual delivery time is contingent on the availability of materials and production back log. The Company is not responsible for any damages, penalties or labour charge-backs resulting from delayed shipments or from its inability to ship by the acknowledged shipping date, nor is it liable for damages of any kind resulting from any delay or failure to deliver or perform due to labour difficulties, customs, delay of sources of supply, transportation difficulties, acts of God, or any other causes beyond the company's control. Claims for damages on account of late or incomplete delivery cannot be considered valid.

Where product modification/special equipment / cabling are to be manufactured in accordance with the purchaser's requirements, the quoted lead-time shall commence from receipt of written confirmation of actual requirements.

Where the contract is to be or may be fulfilled in separate instalments, deliveries or parts, payments for each instalment, delivery or part shall be made as if the same constituted a separate contract.

6. Damage In Transit:

A complaint must be made in writing within three days of receipt of goods if they have been damaged in transit. On receipt of an externally damaged delivery, a claim for damages must be submitted accompanied by an official report from the carrier. The risk in the goods shall pass to the Purchaser at the point of delivery as specified in these Conditions and the Company shall have no responsibility for the safety of the goods thereafter.

7. Limited Warranties:

• Warranty Conditions

Warranty period (of 2 years) or as mentioned in the quotation will be determined from the date of invoicing the light fixture to the first/original purchaser and will be covered as follows:

The Company extends this express limited warranty only to the original purchaser or to the first user. This constitutes the total warranty for the light fixture including ballast/driver. Lamps (other than LEDs if supplied by the Company) are not covered under warranty.

This warranty is not applicable to any fixture manufactured by the Company not installed and operated in accordance with the National Electrical Code. Additionally, this warranty is not applicable to Abby fixtures that have been subjected to excessive conditions and stress including, but not limited to, operating temperatures exceeding 80 degree Celsius on any part of the fixture.

For products or components supplied by the Company for embodiment in equipment or systems, which are not supplied by the Company, it is the responsibility of the Purchaser to ensure that those products or components are suitable for the purpose for which they are being used. The Company is not responsible for any auxiliary equipment not furnished by it, which is used in connection with or attached to the light fixture, or for operation of the light fixture with any auxiliary equipment. Damage to all such equipment is expressly excluded from this warranty. In addition, the Company is not responsible for any damage to the light fixture resulting from the use of auxiliary equipment not supplied by it.

• Obtaining Warranty Service:

If within the warranty period it appears that the installed light fixture does not meet the warranty conditions specified, the Purchaser must notify the Company regarding the nature of the complaint at helpdesk@abbylighting.com and/or phone no. +91 22 40038030 of its warranty claim. The Company or its authorised service agent will provide warranty service directly to you.

Obtaining the Returned Goods Authorisation (RGA): The Purchaser must notify the Company at helpdesk@abbvlighting.com and/or phone no. +91 22 40038030 for all RGA's. After receiving the RGA, the Purchaser shall promptly return the product at the Purchaser's expense to Abby Lighting after receiving instructions as to when and where to ship the product. Failure to follow this procedure shall void this warranty. Should the number of pieces received by the Company differ from the RGA either +/- , the Purchaser will be notified and adjustments will be made at that time. The Company reserves the right to examine all failed products and reserves the right to be the sole judge as to whether any fixtures/ballasts are defective and covered under this warranty. The Company also reserves the right to decide whether a product has been tampered with in which case the warranty becomes invalid.

• General Provisions:

The Company shall in no event be liable for damages in excess of the purchase price of the light fixture, for any loss of use, loss of time, inconvenience, commercial loss, loss of profits or savings or other incidental, special or consequential damages arising out of the use or inability to use such product, to the full extent such may be claimed by law.

The Company's warranty is explicitly limited to the repair or replacement of defective goods, this guarantee does not cover activities or costs associated with the removal, refitting, commissioning of goods post repair and/or replacement.